45
1. Touch a blank area of the screen to begin programming. SELECT
FUNCTION appears at the top of the display. (Image P1)
2. Touch the
icon. PRESS PRG TO PROGRAM appears at the top of
the display along with the days of the week.
NOTE: Either 2 or 4 PERIOD icons will display depending upon how many were
selected in USER SETTINGS.
3. Touch the
icon again. SELECT ICON TO PROGRAM appears at
the top of the display. (Image P2)
4. Touch the day(s) to be programmed. A check mark is placed next to
each day selected.
5. Touch one of PERIOD icons for program settings. The selected
PERIOD icon flashes until another period is selected or
or is
touched.
6. Touch the
or icon to select mode.
7. Touch the time display to set the program start time.
44002-01 R111809
To Next Page
Loading...
