Hunter 44860 - Page 50

50
1. Touch a blank area of the touch screen. SELECT FUNCTION appears.
2. Touch the
icon. SET FAN TO PROGRAM MODE appears.
3. Scroll through the fan settings with the
or sign to select one of
the fan modes:
ON: Fan runs continuously regardless of the system mode.
AUTO: Fan runs when the system is on.
REFRESH: Fan runs on a set interval if the system does not cycle on
for one hour.
PROGRAM: Fan is controlled by the settings in the programs.
4. Touch
to return to the main screen.
The
icon will show on the main screen if the fan is running.
NOTE: If the fan is running and the icon is touched, it will bring up the SET FAN
screen.
44002-01 R111809