Hunter 44905 - Turning off Scheduling

44040-01 • 03/24/2010
20
5
Scheduling
Turning Off Scheduling
To turn off your schedule and have the thermostat permanently set to one temperature:
1. Press the
Schedule
button once.
2. Press the
Turn
Schedule
button.
3. The help banner will show schedule off - permanently hold temp at. Use the or
buttons to adjust your temperature and press
Done
when nished.
Note: You will notice the black bar on the screen beside the Schedule button is not
displayed anymore. This indicates, no schedule is set to run. You can see the difference
between gure 1 and 3.
4. From the home screen, use the or buttons to adjust your temperature.
The system will now ignore all schedules and run at the temperature set by you on the
home screen.
5. If at anytime you wish to change the temperature, just use the or buttons.
6. If you wish to reactivate your schedules, press the
Schedule
button and use the
Turn
Schedule
button
to turn schedules back on and then press
Done
.
Off
On