Hunter 59126 - Assembling the Blades

9
42759-01•11/28/07•HunterFanCompany
Hunterfansuseseveralstylesoffanbladeirons
(brackets that hold the blade to the fan).
6-1. Removetheblademountingscrewsandrubber
shipping bumpers from the motor. Note: Some
blade mounting screws are installed in the
motor to secure shipping blocks.
6-2. For each blade, insert one blade mounting screw
through the blade iron, and attach lightly to the
fan. Insert the second blade mounting screw,
then securely tighten both mounting screws.
Steps 6-1 – 6-2
Blade
Mounting
Screw
6 • Assembling the Blades