Hunter 59629 - Installing the Canopy; Installing the Blades

7
1886
1886
Ceiling Bracket Downrod Hanging Fan Wiring Canopy Blades Light Control
Installing the Canopy
x2
Lift the canopy into place so that
the screw holes are aligned.
Insert the two canopy screws
found in the hardware bag.
F
i
t
t
h
e
c
a
n
o
p
y
i
n
p
l
a
c
e
a
s
s
h
o
w
n
.
bag
Canopy Screw
Installing the Blades:
Repeat x6
x12
bag
Blade Screw
x12
bag
Blade Washer
Insert the blade into the blade slot around the
center screw. Put the blade washers found in
the hardware bag onto the blade screws
found in the hardware bag. Then install
the blade screws to secure each blade to
the fan.
Let the tool do the work!
A magnetic screwdriver will
give you more visibility when
securing the canopy.
Hunter Pro Tip:
Fan style may vary.
Note: