Need help?Do you have a question about the Hunter 90400 and is the answer not in the manual?
General| Type | Ceiling Fan |
|---|---|
| Blade Span | 52 inches |
| Number of Blades | 5 |
| Control Type | Pull Chain |
| Mounting Type | Standard |
| Reversible | Yes |
| Finish | Brushed Nickel |
| Motor Type | AC |
Risk of fire or electrical shock when using solid-state speed control devices with the fan.
Basic precautions for electrical appliances to reduce risks of fire, electric shock, and personal injury.
Highlights include attractive design, powerful motor for maximum airflow, and three speeds for comfort.
Record model name, date code, purchase date, and location for warranty assistance.
Save carton and packing materials for future moves or shipping of the unit.
Carefully remove all items and ensure shipping materials are removed before operation.
Fan requires a grounded 120-volt AC electrical outlet; use adapters if necessary.
Illustrations explain the grounded plug, outlet, and adapter for proper electrical connection.
Guidelines for proper cord insertion, disconnection, inspection, and avoiding damage.
The fan uses a fuse for overload protection; a blown fuse indicates an issue.
Detailed steps to safely replace the fuse, emphasizing correct rating and handling.
Caution against tampering with the plug; discard product if the plug is damaged.
Steps to remove rear grill, align, and attach it to the motor housing with screws.
Instructions to loosen, slide, and tighten the blade assembly onto the motor shaft.
Note on one grill mounting screw featuring a star washer for grounding purposes.
Steps for attaching the front grill, expanding and securing the grill ring.
Place fan on a stable surface and plug into a grounded 120V outlet.
Use the power/speed lever for ON/OFF/speed and the oscillation knob for movement.
Loosen and tighten the neck screw to change the fan's vertical angle.
Fan is permanently lubricated; contact qualified service for any repairs.
Turn off, unplug, wipe dust. Do not immerse fan or allow liquid into motor housing.
Disassemble, clean grills/blades with damp cloth, reassemble after drying.
Clean fan before storing, keep original packaging, store in a dry place, avoid cord stress.
If fan won't oscillate, push the knob on the motor housing top.
If angle cannot be adjusted, loosen and retighten the neck screw.
Contact Hunter support via phone, email, or website for assistance with setup or parts.
Five-year warranty on motor, one-year on other parts for defects in material/workmanship.
Void if used outside USA, unauthorized repairs, mishandling, or lack of maintenance.
To Next Page