Hunter 90434 - Operating the Oscillating Stand Fan; Fan Speed Control and Power; Fan Oscillation Function; Adjusting Fan Blowing Angle

10
©2011 Hunter Fan Co. 44827-01 20111013
Figure 17
High
Medium
Low
Off
Figure 18
Figure 19
OPERATION
To turn the fan on and off or to control the speed, turn the
speed knob on the top of the motor housing to the proper
setting. Figure 17.
Off / Speed Selection
Oscillation
To allow the fan to oscillate, push the knob beside the fan
speed control down. Pull up on the knob if oscillation is
not desired. Figure 18.
Adjustment
To adjust the angle the fan is blowing.
1. Loosen the adjustment knob under the fan motor.
Figure 19.
2. Adjust the fan to the angle desired and retighten the
knob to secure the fan at that angle. .
When adjusting the height of the fan, always grip the
pole above the adjustment knob firmly to prevent the
telescoping pole from collapsing.