6
©2011 Hunter Fan Co. 44827-01 20111013
BASE ASSEMBLY
Figure 3
Figure 4
Figure 5
1. Insert the base weight into the base cover. Figure 3.
2. Insert the base of the telescoping pole into the top
of the base cover and attach to the base weight by
turning clockwise on the screw in the center of the
base weight. Figure 4.
3. Turn the base on its side and turn the handle of the
screw on the bottom of the weight until secure. Figure 5.
4. Tip the base back upright. Figure 6.
5. Grasp the telescoping pole firmly and twist the
adjustment knob counter clockwise to loosen. Figure 6.
6. Raise the inner pole and tighten the adjustment knob
by twisting clockwise until secure. Figure 6.
Figure 6
UNPACKING
As you unpack the fan, save the carton and packing
materials in case you want to move or ship the unit in the
future. Carefully remove all items from the box.
NOTE: It is best to have someone hold the box while
you lift the fan and the protective packaging out of the
carton. Make sure all shipping materials are removed
from fan before operating.
Base Weight
Base Cover
Base Cover
Telescoping
Pole
Screw
Adjustment
Knob
Inner Pole
Screw
To Next Page
Loading...
