6
ACC2 STRONGBOX PEDESTAL ASSEMBLY INSTRUCTIONS
Assembly
Disassembling the Hunter ACC2
inner chassis: Deck assembly
(Decoder version shown)
Step 1: Remove output module by sliding the
slidelock from the locked to the unlocked
position, then pulling the module out (Fig. 1).
Step 2: Loosen the deck assembly captive
screws (qty: 2) using #2 Phillips head
screwdriver (Fig. 2).
Step 3: Remove the deck assembly by tilting
up as shown and pulling out (Fig. 3).
Fig. 1 Fig. 2 Fig. 3
○
○
○
To Next Page
Loading...
