14
contatobrasil@hunterfan.com
MD500-01 • 05/21/14 • © Hunter Fan Company
Make sure the lower switch housing is securely attached to
the upper switch housing. Failure to properly secure all three
assembly screws could result in the light xture falling.
Connect the plugs from the upper and
lower switch housings. Make sure to line up
the colored markings on the connectors.
Attach the pull chain pendant to the short chain
coming from the switch housing.
No Light Kit Option
Lift the lower switch housing until its
screw holes are aligned with the screw
holes in the upper switch housing. Install the
three switch housing screws, found in the
hardware bag. Tighten all three screws.
To Next Page
Loading...
