contatobrasil@hunterfan.com
CONGRATUALTIONS!
YOU’RE DONE!
No Light Kit Option (continued) Light Kit Option
Connect the end of the blue wire from the lower
switch housing to the blue wire from the light
kit. Connect the end of the black with white
stripe wire from the lower switch housing to
the black with white stripe wire from the light
kit. Twist a wire connector onto the bare wires
clockwise until tight.
Hold the lower switch housing in both
hands and push the plug button out with
your thumb. Remove the cap.
Plug
Button
Cap
Lower
Switch
Housing
See page 18 for fan
operation instructions.
15
MD500-01 • 05/21/14 • © Hunter Fan Company
To Next Page
Loading...
