17
contatobrasil@hunterfan.com
MD500-01 • 05/21/14 • © Hunter Fan Company
Press the globe ush against the
metal plate. Thread the light pull
chain through the hole in the center
of the nial cap and thread the fan
pull chain through the hole in the side
of the cap. Finally, thread only the
light pull chain through the hole in
the nial and screw the nial onto the
threaded rod.
Finial
Finial
Cap
Metal
Plate
Globe
Install a 14W CFL bulb (sold
separately) into each of the E27
sockets. When necessary, replace
with bulbs of same wattage.
CONGRATUALTIONS!
YOU’RE DONE!
Connect the appropriate pull
chain pendant to each of the short
chains coming from the nial
and nial cap. The fan pull chain
controls the speed: from high to
off. The light pull chain controls
the light xture: on and off.
Light
Pull
Chain
Fan
Pull
Chain
See next page for fan
operation instructions.
Light Kit Option (continued)
To Next Page
Loading...
