Need help?Do you have a question about the Hunter IC-600PL and is the answer not in the manual?
General| Number of Zones | 6 |
|---|---|
| Stations | 6 |
| Voltage | 120 VAC |
| Wi-Fi Connectivity | No |
| Cycle + Soak | Yes |
| Rain Sensor Input | Yes |
| Enclosure Rating | Indoor/Outdoor |
| Type | Irrigation Controller |
| Power Source | AC |
| Display | LCD |
| Weather Sensor Compatibility | Yes |
| Battery Backup | Yes |
Describes the physical interface elements and controls of the I-Core controller.
Steps for connecting the controller to AC power sources (120V/230V).
Guide for installing power and station expansion modules.
Procedures for wiring station valves and master/pump start relays.
How to connect optional rain, freeze, or wind sensors.
Provides fundamental steps for initial controller programming and operation.
How to define multiple daily start times for each watering program.
How to assign specific watering durations for individual stations.
Methods for selecting watering days: specific, odd/even, or interval.
How to adjust watering run times based on seasonal weather changes.
Assigning sensor responses to stations for automatic shutdown.
Setting up sensor types (Clik, Solar Sync, Flow) and sizes.
Enabling and configuring flow monitoring for individual stations.
Setting the geographical region and water adjustment for Solar Sync accuracy.
Step-by-step guide to set up and initialize flow monitoring.
To Next Page