Need help?Do you have a question about the Hunter Sprinkler System and is the answer not in the manual?
General| Brand | Hunter |
|---|---|
| Model | Sprinkler System |
| Category | Irrigation System |
| Language | English |
Defines areas on the property for zoning and design layout using graph paper.
Process to find static water pressure and available water volume (l/min) for the irrigation system.
Guidance on choosing sprinkler types and their optimal spacing for coverage.
Step-by-step instructions for positioning sprinklers to ensure complete coverage.
Method for dividing areas into zones based on water capacity and sprinkler needs.
Locating valve manifolds and determining pipe sizes based on flow rates and charts.
Details on connecting to city water, including freezing climate considerations and backflow prevention.
Steps for connecting the sprinkler system to the residence's water supply.
Procedure for trenching and laying the main water supply line.
Guidance on installing valve manifolds and ensuring proper spacing for maintenance.
Steps for laying out and trenching lateral lines for sprinkler distribution.
Instructions for locating and wiring the automatic sprinkler controller.
Procedure for installing sprinkler heads and flushing the system.
Techniques for backfilling trenches after pipe and component installation.
List of materials required for the system's point of connection.
Calculations for required pipe lengths and types of fittings.
Listing materials needed for control valves, valve boxes, and the main controller.
Counting and listing required sprinkler heads and pre-assembled swing joint assemblies.
Guidelines on watering application rates and scheduling for different conditions and plant types.
Procedure for preparing the irrigation system for freezing temperatures to prevent damage.
Selecting nozzles to achieve uniform water distribution across zones for matched precipitation.
To Next Page