Need help?Do you have a question about the Hunter G835 and is the answer not in the manual?
General| Brand | Hunter |
|---|---|
| Model | G835 |
| Category | Irrigation System |
| Language | English |
Details on connecting TTS rotors to irrigation piping using Acme threads.
Explains how to connect solenoid lead wires for Electric Valve-In-Head models.
Describes the function and operation of the ON-AUTO-OFF selector.
Details connecting control tubing for hydraulic configurations.
Instructions for removing the upper snap-ring on G800 and G900 series rotors.
Procedure for removing the riser assembly from all rotor models.
Steps for preparing and adjusting the arc on part-circle risers.
Guide for replacing nozzles on G70, G35, G75, G80, G90, and G95 risers.
Instructions for replacing riser seals on G35, G70, G75, G80, G90, and G95 risers.
How to service the filter screen located at the base of TTS rotors.
Explains the purpose and procedures for adjusting the stator on various rotor models.
Procedures for installing riser assemblies and upper snap-rings.
How to identify different types of inlet valves using color coding.
Steps for removing inlet valves, including disengaging safety interlocks for G800 and G900 series.
Procedures for installing inlet valves in G900 series rotors.
Procedures for cleaning and flushing contamination from inlet valves.
Critical safety precautions for inlet valve installation.
How to access components within the rotor's flange compartment.
Procedure for removing the solenoid and pilot valve assembly from the flange compartment.
Details on servicing and replacing the solenoid.
Guide for replacing the pilot valve assembly in TTS rotors.
Procedure for correctly connecting the solenoid to the pilot valve for proper function.
Steps for installing the assembled solenoid and pilot valve into the flange compartment.
Instructions for attaching the selector cap to the solenoid.
Explains the function and factory settings of the pressure regulator.
Details how to adjust the pressure regulator settings on TTS rotors.
Steps for replacing the pressure regulator in the flange compartment.
To Next Page