Need help?Do you have a question about the Hunter G800 Series and is the answer not in the manual?
General| Brand | Hunter |
|---|---|
| Model | G800 Series |
| Category | Irrigation System |
| Language | English |
Explains the basic body styles and configurations of TTS rotors.
Details the ACME threaded inlet and compatible pipe connection options for TTS rotors.
Explains how to connect solenoid lead wires for Electric Valve-In-Head (VIH) models.
Describes the function and operation of the ON-AUTO-OFF selector on VIH rotors.
Details converting Check-O-Matic (C.O.M.) models for hydraulic configuration.
Instructions for removing the upper snap-ring on G800 series rotors.
Explains how to remove the riser assembly from all TTS rotor models.
Outlines steps to prepare for arc adjustments on specific part-circle risers.
Details how to perform arc adjustments on specific part-circle risers.
Instructions for replacing nozzles on G70 risers, including setscrew access.
Steps for replacing nozzles on G35 and G75 risers, noting setscrew usage.
Guidance on replacing nozzles in G80 risers, including shroud removal.
Procedures for replacing nozzles on G90 risers, focusing on setscrew access.
Details on replacing nozzles for G95 risers, including setscrew and orientation.
Instructions for replacing riser seal assemblies on G35, G70, and G75 models.
Steps to replace riser seal components for G80 rotors.
Procedures for replacing riser seal components on G90 and G95 models.
Explains how to remove and clean the riser filter screen on all TTS rotors.
Explains the purpose and necessity of stator adjustments for rotor speed.
Details stator adjustment for G35, G70, and G75 risers.
Instructions for adjusting the stator on G80 rotors.
Procedures for adjusting stators on G90 and G95 risers.
How to insert full-circle riser assemblies into the rotor body.
How to insert adjustable part-circle risers, aligning the arc setting.
Guidance on correctly installing the upper snap-ring for G800 series rotors.
Instructions for properly installing the upper snap-ring on G900 series rotors.
Describes how to disengage the safety interlock feature for inlet valve removal.
Step-by-step instructions for removing the inlet valve from G800 series rotors.
Procedures for removing the inlet valve from G900 series rotors.
Details on servicing inlet valves to remove contamination and prevent leaks.
Critical safety precautions before installing inlet valves.
Instructions for installing inlet valves into G800 series rotors.
Procedures for installing inlet valves into G900 series rotors.
How to access components within the rotor's flange compartment.
Instructions for removing the selector cap from the solenoid.
Detailed steps for replacing the solenoid, including wiring splices.
Instructions for replacing the pilot valve assembly.
Procedures for correctly connecting the solenoid to the pilot valve.
How to install the assembled solenoid and pilot valve into the flange compartment.
Steps to attach the selector cap to the solenoid correctly.
Details on adjusting the pressure regulator for optimal nozzle performance.
Instructions for replacing the pressure regulator.
Final steps to attach the flange compartment lid after component installation.
To Next Page
