Need help?Do you have a question about the Hunter ST Series and is the answer not in the manual?
General| Arc Adjustment | 40-360 degrees |
|---|---|
| Operating Pressure | 30-70 PSI |
| Inlet Size | 1/2 inch |
| Pop-up Height | 4 inches |
| Material | Plastic |
Describes the ST-1600-HS-B Synthetic Turf Rotor, a premium solution for synthetic turf irrigation with a radius up to 165'.
Details the riser-mounted ST-1600-HS-BR configuration as an ideal retrofit and dust-control solution.
Details the overall height, pop-up height, exposed diameter, inlet size, radius, flow, pressure, and rotation speed.
Lists all replaceable parts for the ST-1600-HS-B rotor with corresponding catalog numbers and diagrams.
Step-by-step guide on how to remove and replace the rotor unit from the main body.
Instructions for removing the propeller to check for and clear any trapped debris.
Guidance on adjusting the rotor's speed and setting the desired arc for operation.
Procedure for unthreading and cleaning the secondary nozzle to ensure proper function.
Lists and illustrates all components included in the ST-1600-KIT vault system.
Details the components for the riser-mounted ST-1600-HS-BR rotor system.
Illustrates the placement and spray pattern for an American football field with a #20 nozzle.
Shows the sprinkler layout for an international soccer pitch using a #24 nozzle.
Table detailing radius, flow, and precipitation rates for various nozzles and pressures.
Graphical representation showing the throw radius for different nozzle sizes and angles.
Provides critical information on water impurities, filter installation, and operational safety precautions.
Addresses common troubleshooting steps for non-rotation after installation, like checking nozzles and propellers.
To Next Page