Hunter Key Biscayne - Blade Assembly and Attachment; Blade Iron and Medallion Connection; Securing Blade Irons to Motor Housing; Blade Surface Protection

www.HunterFan.com
1.888.830.1326
Blades
Lightly attach the blade irons to the
motor with screws found in
the hardware bag, then securely
tighten after both screws are attached.
Your blades are shielded with Dust Armor® which
is a nanotechnology coating that repels dust. For
cleaning the fan, use soft brushes or cloths to prevent
scratching. Cleaning agents may damage the nishes.
Place each blade between a blade iron
and medallion. Install three blade screws,
found in the hardware bag, to attach
the medallion to the blade iron.
12
M3556-01 • 06/17/14 • © Hunter Fan Company