Hunter Key Biscayne - Switch Housing & Light Kit Installation; Removing Pre-installed Light Kit Components; Removing Pull Chain Connectors; Separating Light Kit from Housing

www.HunterFan.com
1.888.830.1326
Remove and discard the plastic
connectors from the ends of the
two pull chains.
Remove the pre-installed light kit
assembly screw and red ag from the
light kit assembly. Save the screw. It will
be needed for light kit installation.
Note: The screw was installed for
shipping purposes only.
Carefully remove the light kit from the
upper switch housing and set the light
kit aside.
Switch Housing & Light Kit
Red Flag
13
M3556-01 • 06/17/14 • © Hunter Fan Company