Hunter Key Biscayne - Securing the Globe; Aligning Globe Keyhole Slots; Locking Globe Assembly; Installing Final Globe Screw

www.HunterFan.com
1.888.830.1326
Globe (continued)
Align the keyhole slots in the globe
assembly with the partially installed
screws in the light kit assembly.
Lift the globe assembly and twist
counterclockwise to lock it into place.
Install the third globe assembly screw
and tighten all three screws securely.
CONGRATULATIONS!
YOU’RE DONE!
Make sure the globe assembly is securely attached to the
switch housing. Failure to properly secure all three assembly
screws could result in the light xture falling.
18
M3556-01 • 06/17/14 • © Hunter Fan Company