Hunter Lakeway 52582 - Wiring Connections and Canopy Installation; Receiver and Fan Wiring; Canopy Securing

6
1886
1886
Ceiling Bracket Downrod Hanging Fan Wiring Canopy Blades Control
Hanging the Fan
From bracket
From bracket
From receiver
From receiver (not needed)
From fan
From receiver
From fan
Making Connections for the Receiver and the Fan
Connect wiring harness from ceiling
bracket to the wiring harness from the
receiver. Match up the colored wires.
Connect the wiring harness from fan to the
wiring harness from the receiver. Match
up the colored wires. The blue and white
wiring harness will not be needed.
Connect the grounding wire plug from the
downrod to the grounding wire plug from
the ceiling bracket.
Installing the Canopy
x2
Lift the canopy into place so that
the screw holes are aligned.
Insert the two canopy screws
found in the hardware bag.
F
i
t
t
h
e
c
a
n
o
p
y
i
n
p
l
a
c
e
a
s
s
h
o
w
n
.
bag
Canopy
Screw