Hunter Lantern Bay 59581 - Installing the Glass and Light Fixture Cage; Lower Glass into Fixture Cage; Install Fixture Screws; Align and Secure Fixture Cage

10
1886
1886
Install the third xture
screw and tighten all
three screws securely.
Fixture
Screw
1 of 6
Fixture Screw
bag
Align the keyhole slots in the
cage with the partially installed
screws in the light xture. Lift the
cage and twist counterclockwise
to lock it into place.
IMPORTANT
Make sure the globe assembly is securely
attached to the switch housing. Failure to
properly secure all three assembly screws
could result in the light xture falling.
Installing the Glass and Light Fixture Cage
Carefully lower the glass
into the light xture cage
until it rests in place.
Partially install two xture screws,
found in the hardware bag,
halfway into the light xture as
shown. It does not matter which
two screw holes you choose.
Fixture
Screws
Fixture
Screws
2 of 6
Fixture Screw
bag
Ceiling Bracket Downrod Hanging Fan Wiring Canopy Blades Light Bulbs/Cage Remote Cradle