9
Cleaning the Fan
Use soft brushes or cloths to prevent scratching.
Cleaning products may damage the nishes.
Hunter Pro Tip:
• Push the motor reversing switch rmly left or right to ensure that it is engaged.
• Check the circuit breaker to ensure the power is turned on.
• Make sure the blades spin freely.
• Turn off power from the circuit breaker, then loosen the canopy and check all the
connections according to the wiring diagram.
• Make sure the blades are properly installed on the blade iron posts.
• Turn the power off, support the fan carefully, and check that the hanger ball is
properly seated.
• Use the provided balancing kit and instructions to balance the fan.
• Make sure the blades are properly installed.
• Check to see if any of the blades are cracked. If so, replace all of the blades.
Reverse
Switch
Ceiling fans work in two directions: downdraft
(counterclockwise rotation) and updraft (clockwise
rotation). To change the direction of air ow, turn the
fan off and let it come to a complete stop. Slide the
reversing switch to the opposite position. Restart
the fan.
Updraft (clockwise rotation)
creates a more indirect airow.
Updraft airow is great for
moving warm air downward.
Downdraft (counterclockwise
rotation) creates a direct breeze
and maximum cooling effect.
Fan style may vary.
Note:
To Next Page
Loading...
Need help?
General