Hunter Omnia User Manual

7
1886
1886
Installing the Cap
ON
Turn Power
Lift the cap and align cap
holes with the extend tabs
of the fan housing.
Insert the cap screws found in
the hardware bag
Installing the Blades:
Repeat x5
x10
bag
Blade Screw
x10
bag
Blade Washer
Insert the blade into the blade slot
around the center screw. Put the
blade washers found in the
hardware bag onto the blade screws
found in the hardware bag. Then
install the blade screws to secure
each blade to the fan.
Installing Wall Control
4 of 4
Cap Screw
bag
IMPORTANT
NOTE: Follow the instructions on the blade. Installing it
incorrectly could result in your fan not functioning.
Ceiling Bracket Downrod Hanging Fan Wiring Canopy Blades Wall Control
Fan style may vary.
Note:
Fan style may vary.
Note:

Hunter Omnia Specifications

General

Brand	Hunter
Model	Omnia
Category	Fan
Language	English