Hunter Overton User Manual

7
8
1886
1886
Installing the Blades
Put the blade washers, found in the hardware bag, onto the
blade screws, found in the hardware bag. Then install the
blade screws to secure each blade to a blade iron.
Repeat x10
x30
x30
bag
bag
Blade Screw
Washer
Fan style may vary.
Note:
Installing the Canopy
x2
Lift the canopy into place so that
the screw holes are aligned.
Insert the two canopy screws
found in the
hardware bag.
F
i
t
t
h
e
c
a
n
o
p
y
i
n
p
l
a
c
e
a
s
s
h
o
w
n
.
bag
Canopy
Screw
Lightly attach the blade arms to the motor with screws
found in the
hardware bag, then securely tighten
after both screws are attached.
Repeat x5
x10
bag
Blade Arm Screw
IMPORTANT
NOTE: The blade arms should be mounted with
the ridge facing downward. Installing it incorrectly
could result in your fan not functioning.
Ridge
Fan style may vary.
Note:
Ceiling Bracket Hanging Fan Wiring Canopy Blades Light Glass/Bulbs Wall Control
Fan style may vary.
Note:

Hunter Overton Specifications

General

Brand	Hunter
Model	Overton
Category	Fan
Language	English