PB
2
Do not discard the hardware bags or mix parts from
different bags. Make note of the symbol printed on
each hardware bag. The symbols can be used to
identify the appropriate hardware for each step.
x4
x6 x6
x2
x2
For installing the hanger bracket and wiring the fan
For installing the blades
bag
bag bag
Hunter Pro Tip:
Find a part that is missing or damaged?
Don’t take it back to the store. Let us make it right. Visit us at HunterFan.com or call us at 1.888.830.1326.
Motor
Blade Screw
BladeWasher
Ceiling Bracket
Wood Screw
WIre Nut
Washer
M3968-01 r122822
We recommend that you pull everything out of the box and lay it out. We have
grouped the drawn components below with the hardware you’ll need for those
parts. The screws below are drawn to scale to make it easier to identify what
piece of hardware is needed to install each component.
Here is what comes in your box:
Fan style may vary.
Note:
x3
Blade
Lower Switch Housing Cap
For installing the canopy
x1
x1
x3
Top Housing
Screw
Grounding
Screw
bag
Canopy
Screws
Canopy
Trim Ring
x4
Cap Screw
bag
For your convenience,
you may receive extra fasteners.
bag
Wall Control
To Next Page
Loading...
Need help?
General