10
Easy Access Wire Compartment
Simplified wire hookups
The Pro-C permits fast and easy connection
of wiring in the spacious wiring compartment.
With the sturdy terminal block, the wire
can be inserted
without bending for
simplified installa-
tion. The primary
terminal block has
dedicated terminal
screws for both a
sensor hookup and a
24VAC connection
for accessories.
Each terminal will
accommodate two
20-12 gauge wires.
Upgrade to Centralized Control
Network through IMMS™ to make
programming changes and monitor
system conditions from your computer
The Pro-C can be networked to your computer
through the Hunter Irrigation Management and
Monitoring System™ (IMMS). The IMMS
allows the user to program controller functions
that would typically be handled directly at
each controller. Scheduling days to water, run
times, start times and more can be done from
a single computer at a desk miles away from
the installation. A key function of the IMMS is
its ability to monitor changing conditions with
the aid of such options as flow sensors, rain
sensors, and other weather-sensing devices. No
system available today is more cost effective
than the Hunter IMMS. Best of all it is able to
team with any or all of the Hunter controllers,
including the Pro-C.
Test Program
Simple test program feature allows for
quick system checks
The Pro-C has a built-in test program feature
that allows the user to run all stations for a
predetermined number of minutes. This feature
is great for conducting a quick system check
on all zones or to activate valves during
winterization.
The one button activation and single run
time entry makes the test program simple and
easy to use.
FEATURES AND BENEFITS (continued)
To Next Page
Loading...
Need help?
General
