Hunter Radeon - Downrod Reassembly and Functionality; Downrod Reassembly Procedure; Downrod Assembly Verification

10
1886
1886
Ceiling Bracket Hanging Fan Wiring Installing Fan Body Blades Light Remote App
SIMPLEconnect connects to available 2.4 GHZ WiFi networks.
Setting up WiFi
Note: The HomeKit setup code is located on the
front cover of the English side of this manual, on
the inside of the remote cover, and on fan itself
(fan style may vary).
Launch the app.
Follow the onscreen prompts to set up your fan.
Download the app:
Visit your app store and search “Simpleconnect
™
2.0” to nd the app.
1
2
3
Need to install the app later?
When ready, turn the wall switch off and then on.
Wait three minutes before downloading the app.
Hunter Pro Tip:
Use of the HomeKit logo means that an electronic accessory
has been designed to connect specically to iPod, iPhone, or
iPad, respectively, and has been certied by the developer to
meet Apple performance standards. Apple is not responsible for
the operation of this device or its compliance with safety and
regulatory standards. Please note that the use of this accessory
with iPod, iPhone, or iPad may affect wireless performance.
Compatible with iOS 7.1 or higher / Android 4.3 or higher
Android and Google Play are trademarks of Google Inc.
Apple logo is a trademark of Apple, Inc.
App store is a service mark of Apple, Inc.
Downrod
If you need a different downrod length follow these steps:
Follow steps 1-5 to remove standard downrod pipe
Follow steps 6-10 to reassemble with new downrod
1 2 3 4 5
678910
1
10
9
2
7
4
8 3
65
Here is another view of
the downrod assembly
unassembled.
Pin
Assembled downrod
should look like this
Pin
WARNING
FAN FALL HAZARD
To prevent SERIOUS INJURY or DEATH:
• ALWAYS follow the
downrod assembly
instructions exactly.
• VERIFY the downrod
is assembled correctly
by rmly pulling on the
hanger ball.
• Pin must be reinserted
to secure downrod
assembly.