Hunter TCX57 - Moving Parts Hazards; Inflator and Pressure Limiter

Operation Instructions for TCX56/57 Tire Charger
22
Keep hands clear of wheel during sealing and seating of beads.
WARNING
Risk of Tire Failure When Driving.
Excessive air pressure can damage the internal structure of a tire, without this
damage being visible to you, resulting in an automobile accident, personal injury or
death.
WARNING
1.15 Moving Parts
• MOVING PARTS PRESENT.
MOVING PARTS CAN CUT AND CRUSH
• Keep hands away from moving parts
• Crush may cause injury
WARNING
1.16 Inflator and Pressure Limiter
As a safety device, the pressure limiter prevents the operator from using excessive air
pressure.
Bead seating pressure should never exceed the tire manufacturer’s maximum bead seating
pressure as stated on the sidewall of the tire.
If tires being mounted require more than the tire manufacturer’s maximum bead seating
pressure, the wheel should be removed from the tire changer, placed in an ination cage, and
inated per manufacturer’s instructions.
1.17 Mount / Demount Head
• MOVING PARTS PRESENT.
MOVING PARTS CAN CUT AND CRUSH
• Keep hands away from moving parts
• Crush may cause injury
WARNING
The mount/demount head is suspended from the column above the turntable.
The head has a mounting and demounting lip that is designed to install or remove the bead
of tire as the wheel is rotated clockwise.