Need help?Do you have a question about the Huntleigh Sonicaid FM800 Series and is the answer not in the manual?
General| Type | Fetal Monitor |
|---|---|
| Manufacturer | Huntleigh |
| Display | LCD |
| Power Source | AC/DC |
| Battery Life | 4 hours |
| Operating Temperature | 10°C to 40°C |
| Storage Temperature | -20°C to +55°C |
| Altitude | Up to 3000 m |
| Tocotransducer Range | 0 to 100 |
| Paper Speed | 1 cm/min or 2 cm/min |
| Maternal Heart Rate Range | 30 - 240 bpm |
Introduces the FM800 series monitors and their antepartum/intrapartum monitoring capabilities.
Details the main unit's front panel, connectors, and modules.
Lists all transducers and cables supplied with the FM800 system.
Identifies hardware controls for printer, audio, and power.
Explains the layout and display of fetal and maternal parameters.
Details managing audio signals and printer operations.
Clarifies Setup, Current Alarms, Default Alarms, and System Settings.
Procedures for setting device time/date and entering patient information.
Configuration for fetal movement tracking and timing functions.
Customizing preferences, alarms, and system behavior.
Covers ultrasound monitoring, FHR confidence, and fetal ECG.
Details Toco, IUP, ECG, BP, Oximetry, and Temperature monitoring.
Addresses FHR confidence, false readings, and signal loss.
Understanding, responding to, and controlling alarms.
Setting high/low limits for FHR, BP, Oximetry, and Temperature.
Using SonicaidTrend and SonicaidCare for data analysis.
Connecting the FM800 to PC-based analysis and review systems.
Guides on resolving problems with FHR, Oximetry, Printer, and BP.
Details physical, environmental, and electrical specifications of the FM800.
Covers electrical safety, material contact, and ultrasound safety guidelines.
Outlines service procedures, warranty terms, and contact details.
Tests and procedures to identify issues with ultrasound transducers.
To Next Page