The next tool will be loaded and used to mill in the G101
map.
The G109 mode will be used to execute an approach.
Programming in the way allows the C axis to be positioned
without forcing the tool to travel through the center of the
part.
T0707
G109
M131
G97 M33 S1500
G54
G0 Z.25 C0.
X2.5
Now that the approach move has been programed cutting
motion with the proper map can be executed.
G101
G7
G94
X-.5 Y1.25
Z-1.625
G1 G41 Y.95 F10.
X.5
G40 Y1.25
G0 Z.25
G109
X2.5
C180.
G101
X.5 Y-1.25
Z-1.625
G1 G41 Y-.95 F10.
X-.5
G40 Y-1.25
G0 Z.25
G109
To Next Page
Loading...
