Need help?Do you have a question about the Hurco winmax and is the answer not in the manual?
General| Control System | WinMax |
|---|---|
| Machine Dimensions | Varies by model |
| Maximum Turning Diameter | Varies by model |
| Maximum Turning Length | Varies by model |
| Spindle Speed | Varies by model |
| Spindle Motor Power | Varies by model |
| X-Axis Travel | Varies by model |
| Z-Axis Travel | Varies by model |
| Turret Stations | Varies by model |
| Tool Type | Varies by model |
| Chuck Size | Varies by model |
| Machine Weight | Varies by model |
Details how to program part profiles using elements like turns, faces, arcs, and chamfers.
Explains programming for OD and ID threading operations, including parameters.
Covers programming for internal, external, and face grooves with corner options.
Describes programming for drilling, center drilling, and tapping operations.
Introduces operations using live tooling for radial and axial milling.
Details programming for axial contour segments including lines, arcs, circles, frames, slots, and flats.
To Next Page
