x - Programming and Operation Information v546CO WinMax Lathe Conversational Part Programming
PROGRAMMING AND OPERATION
I
NFORMATION
Hurco provides documentation for using WinMax software on a control or desktop in two
formats: on-screen Help and PDF. The information contained in both formats is identical.
On-screen Help contains information about the current screen. If Help is not available for
a screen, a Welcome screen appears with access to the Table of Contents, Index, or
Search functions.
• To view the on-screen Help directly on a Hurco control, select the Help
console key.
• To view the on-screen Help on the desktop software, select the Help icon in
the menu bar.
PDF files are available on the hard drive. These files can be copied from the hard drive to
a USB memory device and transferred to a PC for viewing and printing.
Using the On-screen Help
On-screen Help provides information about using WinMax. The Help is context-sensitive
to the screen level. Press the console Help button to display the Help topic for the current
screen. The following list describes Help functions:
• Buttons in the upper left-hand corner of the Help screen are used to move
through Help topics and print screens.
•Use the Hide button to hide the navigation pane.
•Use the Back button to return to the previous Help screen.
•Use the Print button to print the current displayed Help topic, if a printer
is attached and configured. See Printing the Programming Manuals, on
page - xi for more information about printing.
• Use the arrow buttons to move between pages within a Help topic and to
move through topics.
•Use the Contents tab for a list of information sorted by subject:
1. Select the “+” to expand the topic and view sub-topics.
2. Select the topic to display it.
•Use the Index tab to show the Help index:
1. Quickly scroll to an index topic by typing the topic in the box at the top of
the index.
2. Select a topic and the Display button to view the topic.
To Next Page
Loading...
