Hurco winmax - Turning Data Blocks

2 - 10 Conversational Part Programming v546CO WinMax Lathe Conversational Part Programming
Turning Data Blocks
A Turning softkey menu is available for all machines. In addition, this softkey menu
appears on the WinMax Lathe desktop software.
From the New Block screen or Program Review screen, select the Turning F2 softkey to
access the following types of turning data blocks:
Profile Data Block . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 11
Threading Cycle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 38
Grooving Cycle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 51
Hole Cycle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 58
Cutoff Block. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 62