Hurco winmax - NC Program Call

2 - 210 Conversational Part Programming v546CO WinMax Lathe Conversational Part Programming
NC Program Call
NC Program Call allows you to execute an ISNC G-code (NC) program from within a
Conversational part program with NC/Conversational merge. G-code programs can be
used and re-used within the Conversational program.
To include this data block in a Conversational program, from the Program Review screen
or from the New Block screen, select the Select the NC PROGRAM CALL F6 softkey.
The NC PROGRAM CALL screen appears with a choice for String Arguments or List
Arguments:
Figure 2–172. NC Program Call screen, String Argument Type
Figure 2–173. NC Program Call screen, List Argument Type