Hurco TM6 - Two Axis Sample Program

Two axis sample program
%
O1234(TWO AXIS SAMPLE)
G20 G40 G80 G90
G28 U0. W0. (SENDS TURRET HOME)
T0101 (CALL TOOL ONE OFFSET ONE)
G92 S1000 (MAX RPM 1000RPM)
G97 M3 S500 (TURN THE SPINDLE ON AT 500 RPM)
G54
G0 G95 Z.25
X2.25
G96 G1X2.1 F.004
G72 U.1 R.1 (U IS DEPTH OF CUT R IS RETRACT DISTANCE)
G72 P1 Q2 U0.005 W0.005 F.002 S1000 T0101
N1 G1 X2.0 Z0.
X-.04
N2 Z.05
G0 X2.25 Z.25 (RETURN TO SAFE POSITION)
G70 P1 Q2 F.002 S1000
X2.25 Z.25 (RETURN TO SAFE POSITION)
G71 U.1 R.1
G71 P3 Q4 U.005 W.002 F.005 S1000
N3 G1 Z.05 X.95
Z0.
X1.Z-.025
Z-.5
X1.2
X1.25 Z-.55
Z-1.
G2 X1.75 Z-1.25 R.25
G1 X1.95
X2. Z-1.3
N4X2.05
X2.25 Z.25 (RETURN TO SAFE POSITION)
G70 P3 Q4 F.002 S1000
X2.25 Z.25 (RETURN TO SAFE POSITION)
M5 (STOP SPINDLE)
G28 U0. W0. (SENDS TURRET HOME)
T0202
G92 S1000
G97 M3 S500
G54
G0 G95 Z.25