07
6. Assembly and Disassembly of Silicone
※
Silicone packings are consumables that are
recommended to be replaced once every 6 to 12
months. They are available for purchase through
the Customer Service Center.
01
02
03
(The juicer may leak if the product is not assembled
properly.)
Hold and take out the packing as if you are
pulling it back.
After cleaning, insert one side of the packing
first as if you are hooking it.
Insert the remaining part and press down the
perimeter.
Extraction Packing
After cleaning, insert in a way that the round
side of the packing faces outward while the grid
grooves face upward.
Assemble the packing as shown in the figure.
Juice Cap Packing
Hopper Packing
01
02
03
Grab one side and pull it back to detach it.
After cleaning, check the top and bottom of
the packing and insert it as if you are hooking
one side.
Firmly press the remaining part of the
packing without any folded area.
Chamber Packing
Seal Packing
01
02
01
02
To Next Page
Loading...
Need help?
General
