To Next PageTo Next Page
Need help?Do you have a question about the HUSABERG ENDURO FE 400 and is the answer not in the manual?
General| Displacement | 398cc |
|---|---|
| Starter | Electric |
| Transmission | 6 speed |
| Fuel System | Keihin MX FCR 39 |
| Cooling | Liquid |
| Front Brake | Disc |
| Rear Brake | Disc |
| Engine Type | Four stroke, single cylinder, SOHC, 4 valves |
| Front Suspension | WP USD 4860 MAYA |
| Rear Suspension | WP PDS 5018 DCC |
Conditions for servicing the motorcycle, including parts and tools.
Information regarding copyright and reproduction of the manual's content.
Guidance on personal protective clothing and apparel for safe riding.
Advice on maintaining the motorcycle's condition and avoiding mechanical damages.
Instructions for safely transporting the motorcycle, preventing leaks.
Recommendations for safe riding practices and obeying regulations.
Importance of performing a pre-ride inspection for safety and machine condition.
Technical specifications for various motorcycle models including engine, chassis, and dimensions.
Maintenance intervals for chassis components of Motocross and Desert models.
Maintenance intervals for chassis components of Enduro and Elduro models.
Location of Vehicle Identification Number (VIN) and Engine Number.
Information and recommendations regarding the steering lock and anti-theft devices.
Description of ignition lock positions and their functions for starting the bike.
Details on the ignition switch for electric start models and its operational positions.
Step-by-step guide for starting the motorcycle using the kick starter.
Step-by-step guide for starting the motorcycle using the electric starter.
Details on synthetic oil, capacity, and maintenance intervals for the lubrication system.
Procedure for changing engine oil, filter, and cleaning the oil screen.
Checks and maintenance for the throttle, twistgrip, and carburetor components.
Procedure for adjusting idling and mixture screws for optimal engine performance.
Checks for hydraulic line, fluid level, and adjustment of the clutch lever.
Procedure for bleeding air from the hydraulic clutch system.
Information on the automatic and manual decompression systems.
Procedure for adjusting the decompression cables for proper operation.
Inspection and maintenance of the front wheel, spokes, nipples, and bearings.
Instructions for removing and reassembling the front wheel, including torque values.
Inspection and maintenance of the rear wheel, spokes, nipples, and bearings.
Instructions for removing and reassembling the rear wheel, including chain adjustment.
Procedure for cleaning and lubricating the motorcycle's drive chain.
Inspection of front and rear sprockets for wear and replacement recommendations.
Checking and adjusting the drive chain tension for proper operation.
Instructions for adding brake fluid and replacing brake pads.
Procedure for bleeding air from the front brake hydraulic system.
How to adjust the front brake lever for personal preference and pressure point.
Instructions for adding brake fluid and replacing brake pads.
Procedure for bleeding air from the rear brake hydraulic system.
How to adjust the rear brake lever for personal preference and height.
Adjusting the WP front fork for performance based on conditions and rider.
How to adjust the rebound and compression damping on the front fork.
Procedure for bleeding air and changing oil in the front fork.
How to adjust the rebound and compression damping on the rear shock absorber.
Procedure for measuring static spring deflection and adjusting rear spring preload.
Step-by-step guide for removing the swingarm for inspection and lubrication.
Wiring diagram for Enduro models that do not have turn signals.
Wiring diagram specific to Enduro models sold in the USA.
