To Next PageTo Next Page
Need help?Do you have a question about the HUSABERG FS 650 e and is the answer not in the manual?
General| Engine Type | Single cylinder, 4-stroke |
|---|---|
| Transmission | 6-speed |
| Front Suspension | WP USD 48 mm |
| Ignition | Kokusan digital |
| Final Drive | Chain |
| Fuel System | Keihin FCR 41 |
| Cooling | Liquid-cooled |
| Rear Brake | Single disc, 220 mm |
| Rear Suspension | WP monoshock |
General safety warnings about engine running, battery, and fuel.
Guidelines for using original parts, tools, and maintenance.
Information on copyright and reserved rights.
Covers riding under influence, gear selection, coolant checks, and centerstand use.
Advice on frequent servicing, clearances, and cleaning.
Importance of protective apparel like helmet, goggles, and boots.
Maintaining the bike in safe condition and using original parts.
Guidelines for safe transport of the motorcycle.
Care in riding, obeying regulations, and understanding capabilities.
Habit of inspecting the motorcycle before and after each ride.
Checklist for engine oil, ignition, brakes, fuel, and other systems.
Technical specifications for various models, including engine, chassis, and dimensions.
Detailed technical specifications including rims, tires, suspension, brakes, and lights.
Standard jetting settings for different models and applications.
Illustrations of carburettor parts and related tools.
Specifications for tightening torques of various components.
Maintenance schedule for FC, FSc, FX and FE, FSe models.
Location of Vehicle Identification and Engine Numbers.
Location and operation of steering lock and ignition lock.
Functions of controls on the left handlebar switch (Type I & II).
Adjustment of clutch lever and manual decompression lever.
Operation of twistgrip, starter button, and dual ignition curve switch.
Description of speedometer and indicator lamps.
Step-by-step starting procedure for kick starter models.
Step-by-step starting procedure for electric starter models.
Important adjustments and checks for easy starting.
Details on oil type, change intervals, and procedures.
Description of CDI system, checking spark plug, and ignition timing.
Importance of air filter cleaning and replacement procedures.
Valve clearance checks, adjustment intervals, and procedures.
Throttle, twistgrip, and intake manifold checks.
Procedures for adjusting idling and mixture screws.
Recommendations for fuel grade and fuel tank removal.
Checking coolant level and mixture, and leak checks.
Checking hydraulic line, fluid level, and lever adjustment.
Procedure for bleeding air from the clutch hydraulic system.
Description of automatic and manual decompression systems.
How to adjust manual decompression cables.
Checking rim, spokes, nipples, bearings; removal/assembly.
Checking rim, spokes, nipples, bearings; removal/assembly.
Procedure for removing and replacing wheel bearings.
Maintenance, cleaning, lubrication, and tensioning of the X-ring chain.
Checking front and rear sprockets for wear.
Checking fluid level, hose, pads, and bleeding procedure.
Recommendations for supermotard front brakes, run-in period.
Checking fluid level, hose, pads, and bleeding procedure for rear brake.
Adjustment of front fork rebound and compression damping.
Procedure for bleeding air from the front fork.
Checking spring deflection, adjusting preload, and oil change intervals.
Adjustment of rear shock absorber for off-road models.
Adjustment of rear shock absorber for supermotard models.
Checking and adjusting steering head bearing clearance.
Checking and servicing swingarm bearings and bushings.
Wiring diagram for FE/FS electrical starter models without turn signals.
Wiring diagram for FE/FS electrical starter models with turn signals.
Wiring diagram for FC/FX electrical starter models.
Wiring diagram for FC/FS kick-starter models.
