DISMOUNTING AND MOUNTING THE ENGINE
B
8
– Mount both radiator hoses and tighten the hose
clamps (1).
– Connect the overflow hose (2) and attach to the frame
with cable clips.
–Connect the battery cables.
– Mount the tank and tighten the two bolts (4) on the
side of the spoiler.
– Connect both fuel hoses and open the fuel taps.
– Mount the air filter (5) and screw tight.
–Mount the seat.
– Lift the motorcycle off the engine work stand.
–Bleed the cooling system.
– Check the engine oil level.
– Check the oil level and cooling liquid level again after
a short, cautious test ride.
1
1
1
2
3
4
To Next Page
Loading...
Need help?
General
