Husky 0300813A - Connecting the Air Hose; Connecting Accessories to Air Hose

Assembly (continued)
Attach the female male plug (R) into the quick
coupler (H) on the air compressor.
If using the blow gun (N), connect it directly to the air
hose (U) (pre-attached).
If using the inflation needle (0) (pre-attached), connect
it directly to the blow gun (N).
If using the high pressure nozzle (Q), connect it directly
to the blow gun (N).
If using a tire chuck (S), connect it to a male quick
plug (W) and then connect to the quick coupler (V).
R
H
11
R
w