Husky HMT5212 - Assembly; E N a N C E; Maintenance

Assembly
Maintenance
1
Caster maintenance
2
Drawer maintenance
□ Grease the casters annually using high-quality
bearing grease.
□ Lubricate the slides semi-annually.
1
Attaching the cabinet handle
□ Position the cabinet handle (B) over the holes on the
cabinet (A).
□ Attach with the bolts
(BB) and tighten with a
wrench (CC).
NOTE:
The holes in the cabinet are tapped and do not
require nuts.
HUSKYTOOLS.COM
5 Please contact 1-888-HD-HUSKY for further assistance.
Attaching the casters
□ Be sure the drawers are locked and lay the cabinet (A)
□
□
□
CAUTION: Do not over tighten the bolts.
2
A
B
BB
Attach 2 swivel casters (D) to the cabinet (A), on the
same side as the handle (B) and attach the other 2
swivel casters (D) to the opposite side of the cabinet (A).
Insert bolts (AA) through the swivel casters (D)
into the cabinet (A).
into the cabinet (A).
Tighten all casters with a wrench (CC).
□ Return the cabinet (A) to its upright position.
A
AA