Operation
1
Removing the drawers
2
Re-inserting the drawers
Fully extend the empty drawer.
□ elihw revel esaeler kcalb eno eht pu hsuP
pulling down on the other black release lever.
□ Pull the drawer outward until it is released from the
drawer slide.
Extend the drawer slides.
□ Insert the brackets on each side of the drawer into
the slots in the slides, being careful that they are
properly positioned.
□ Once properly inserted, completely close the drawer
to set the slides in their proper positions.
Care and Cleaning
□ Periodically clean the drawer fronts, drawer trim, and other surfaces with a mild detergent and
water.
□
you would on a car.
□
6
To Next Page
