What to do if the bobbin area is full of lint in my Husqvarna Viking Designer Jade 35 Sewing Machine?
If the bobbin area of your Husqvarna Viking Sewing Machine is full of lint, clean the lint from the bobbin area. Also, ensure you are using only the bobbins approved for your specific model.
What to do if my Husqvarna Viking Sewing Machine will not sew?
If your Husqvarna Viking Sewing Machine won't sew, check that all plugs are securely plugged into both the machine and the wall socket. Verify that the foot control cord is securely plugged into the front socket on the bottom right side of the machine. Finally, ensure the bobbin winder spindle is pushed to the sewing position.
What to do if the needle is too small for the thread in Husqvarna Viking Designer Jade 35 Sewing Machine?
If the needle is too small for the thread you're using with your Husqvarna Viking Sewing Machine, change the needle.
How to remove lint collected between the feed teeth of Husqvarna Viking Designer Jade 35?
To remove lint from the feed teeth of your Husqvarna Viking Sewing Machine, remove the needle plate and clean the feed teeth with the brush.
What to do if needle is bent or blunt in Husqvarna Viking Designer Jade 35 Sewing Machine?
If the needle in your Husqvarna Viking Sewing Machine is bent or blunt, insert a new needle.
What to do if the thread is thick or slubbed in Husqvarna Viking Designer Jade 35 Sewing Machine?
If the thread you are using is thick or slubbed, change the thread in your Husqvarna Viking Sewing Machine.
Why fabric does not feed in Husqvarna Viking Designer Jade 35 Sewing Machine?
If the fabric does not feed through your Husqvarna Viking Sewing Machine, make sure the feed teeth are not lowered.
Why is the stitch wrong, irregular or narrow on my Husqvarna Viking Designer Jade 35?
If you're getting a wrong stitch, or an irregular or narrow stitch on your Husqvarna Viking Sewing Machine, deactivate twin needle or stitch width safety in the settings menu.
Why the thread cutter does not cut the thread on my Husqvarna Viking Designer Jade 35 Sewing Machine?
If the thread cutter on your Husqvarna Viking Sewing Machine is not cutting the thread, remove the needle plate and clean lint from bobbin area. Also, enable cut auto in the SET menu.
What to do if the needle plate hole is damaged on Husqvarna Viking Designer Jade 35 Sewing Machine?
If the needle plate hole is damaged on your Husqvarna Viking Sewing Machine, change the needle plate.
General| Type | Computerized sewing and embroidery machine |
|---|---|
| Embroidery Designs | 70 |
| Maximum Stitch Width | 7 mm |
| Maximum Stitch Length | 5 mm |
| USB Connectivity | Yes |
| Buttonhole Styles | 7 |
| Automatic Needle Threader | Yes |
| Speed Control | Yes |
| Free Arm | Yes |
| Display | Color Touchscreen |
| Bobbin type | Drop-in |
| Presser Feet | Included |
Identifies front, needle area, rear, storage, and accessory components of the machine.
Details the embroidery unit and all included accessories.
Explains the different presser feet and their specific uses.
Overview of utility stitches, stitch menus, and available alphabets.
Unpacking the machine, connecting power, foot control, and USB.
Packing away, LED lights, free arm use, and cabinet mounting.
Instructions for using horizontal, vertical, and auxiliary spool pins.
Steps for threading the machine, needle threader, and twin needle.
Detailed steps for winding a bobbin correctly.
How to insert the bobbin and adjust thread tension.
Feed teeth, presser foot adjustments, and changing presser feet.
Information on different thread types and embroidery stabilizers.
Details on needle types, proper insertion, and important information.
Using the USB port, stick, connecting and removing it.
Information on the embroidery intro software and updating machine software.
Explains the display and basic information shown in sewing mode.
How to navigate stitch menus and select desired stitches and fonts.
Guidance on selecting fabric types and using the SEWING ADVISOR™.
Tips for sewing leather, vinyl, and introduction to techniques.
How to adjust stitch length, density, and width.
Options for adjusting stitch elongation, needle position, and mirroring.
Explains common pop-up messages encountered during sewing.
Guide to creating custom stitch programs by combining stitches and letters.
Inserting/deleting stitches, commands, and combining programs.
Adjusting program settings, sewing out, and machine memory.
Process for saving custom stitches or programs to memory.
Explains various pop-up messages encountered in program mode.
How to sew a seam on woven and stretch fabrics.
How to overcast fabric edges to prevent fraying.
Sewing seams and overcasts together, and temporary basting stitches.
How to create an invisible hem using the blind hem foot.
Techniques for general hemming and sewing jeans hems.
How to sew stretch hems and an overview of buttonholes.
Step-by-step guide for sewing a one-step buttonhole.
Instructions for sewing buttonholes manually, especially longer ones.
How to sew corded buttonholes and sew buttons onto fabric.
Instructions for sewing zippers using the zipper foot.
Using the machine for darning, mending, and manual bartacking.
General information about quilting, crazy quilt stitching, and hand-look quilting.
Techniques for free motion quilting, including stippling and circles.
Details the embroidery unit, hoop overview, and designs on the USB stick.
Connecting, removing the unit, and downloading backup designs.
Attaching the embroidery foot and hooping fabric and stabilizer.
Sliding the hoop on/off and initial steps to start embroidery.
Explains the Edit View and Stitch-Out View in embroidery mode.
How to load designs, fonts, and text from USB or PC.
Deleting letters and loading text as an embroidery design.
Viewing details about designs, including size, stitches, and color blocks.
Modifying design height, width, position, rotation, and mirroring.
Selecting hoop size, managing hoop positions, and returning to stitch.
Functions like monochrome, basting, corner check, and stitch stepping.
Stepping through colors and understanding embroidery pop-up messages.
Covers messages for hoop, thread, design size, USB, and process completion.
General cleaning of the machine, bobbin area, and under bobbin case.
Replacing needle plate and solutions for general machine problems.
Solutions for thread breaks, uneven stitches, and feed issues.
Fixing distorted/puckered designs, machine not embroidering, and servicing.
Technical details of the sewing machine and its foot control.
To Next Page