Why does my Husqvarna 1153136-26 engine start but stop again?
Your Husqvarna Chainsaw engine might start and then stop due to several reasons. It could be due to incorrect fuel type, in which case you should drain the fuel tank and refill it with the correct fuel. Alternatively, try cleaning or replacing the air filter, or replacing the fuel filter.
What to do if my Husqvarna 1153136-26 Chainsaw engine does not start?
If your Husqvarna Chainsaw engine doesn't start, several factors could be the cause. The starter pawls might be blocked, requiring adjustment or replacement. Make sure that you use the correct fuel type. If the fuel tank has chain oil, drain it, or contact your servicing dealer if you already tried to start the chainsaw. The spark plug might be dirty or wet, so ensure it is clean and dry. Also, verify that the electrode gap is correct and that the spark plug is tightened correctly.
To Next Page
General
