Need help?Do you have a question about the Husqvarna 165 R and is the answer not in the manual?
Details on ignition system, advance, spark plug type, and gap.
Carburettor model, fuel tank capacity, and recommended fuel mixture.
Specifies pressure limits and tools for leakage testing.
Specifies torque values for fasteners and points requiring lubrication.
Details on testing carburettor pressure and checking for leaks.
Table and explanation for different fuel-oil mixture ratios.
SEM ignition system tester for electrical diagnostics.
Inspection of the metering system components for wear or damage.
A table to diagnose common carburettor issues and their causes.
Procedures for checking the carburettor's pump and diaphragm.
Procedure for fine-tuning the low speed needle for optimal performance.
Steps for setting the basic adjustment of carburettor needles.
Procedure for fine-tuning the high speed needle for optimal performance.
Diagnostic steps for identifying electrical system faults, starting with spark.
Checks for wear and damage on cylinder walls and piston rings.
Checks for damage, wear, and play in the crankshaft and connecting rod.
To Next Page
General