Husqvarna 225i User Manual (English)

Questions and Answers:

C
clarkaliciaAug 16, 2025
What to do if the warning indicator flashes on my Husqvarna 225i?
- N
  Nicholas AlexanderAug 16, 2025
  If the warning indicator flashes on your Husqvarna Chainsaw, it could be due to several reasons: * The chain brake might be engaged, so disengage it. * There could be a temperature deviation, in which case you should let the product cool down. * The saw chain may be overloaded and unable to move, so release the saw chain. * The power trigger and the start/stop button might be pushed simultaneously; release the power trigger to activate the product.
M
Meredith MarksAug 19, 2025
Why is the Error LED flashing on my Husqvarna 225i?
- E
  Erik DiazAug 19, 2025
  The Error LED on your Husqvarna Chainsaw might be flashing due to: * Temperature deviation: Use the battery in temperatures between -10°C (14°F) and 40°C (104°F). * Too much voltage: Ensure the mains voltage matches the product's voltage, as indicated on the rating plate. * If neither of these apply, remove the battery from the battery charger.
L
Lee BaileyAug 22, 2025
How to fix orange activate LED flashing on Husqvarna 225i?
- C
  Christopher CabreraAug 22, 2025
  If the orange activate LED is flashing on your Husqvarna Chainsaw, it indicates low battery voltage. Charge the battery to resolve this issue.
S
smithrobertAug 25, 2025
Why is the charging LED flashing green on my Husqvarna Chainsaw?
- R
  Rhonda LewisAug 26, 2025
  The charging LED on your Husqvarna Chainsaw flashes green because of a temperature deviation. The battery is either too cold or too hot to charge or use. Allow the battery to cool down or warm up to the correct temperature, and then it can be used or charged again. Use the battery charger in ambient temperatures between 5 °C (41 °F) and 40 °C (104 °F).
A
Alexis MyersAug 28, 2025
What does it mean when the green LED flashes on my Husqvarna 225i?
- B
  brent48Aug 28, 2025
  A flashing green LED on your Husqvarna Chainsaw indicates low battery voltage. You should charge the battery.
B
Brandi MartinezAug 30, 2025
What does it mean if the charging LED is red on my Husqvarna 225i?
- M
  Michael FisherAug 31, 2025
  If the charging LED on your Husqvarna Chainsaw is red, it means there is a permanent battery charger error. Speak to your dealer.
H
henrycassandraSep 3, 2025
Why is the green activate LED flashing on my Husqvarna 225i Chainsaw?
- S
  Susan ChenSep 3, 2025
  If the green activate LED is flashing on your Husqvarna Chainsaw, it means that the battery voltage is low. To solve this, charge the battery.
K
kimberlydickersonSep 6, 2025
What to do if the error LED flashes on my Husqvarna 225i?
- T
  Tammy WilsonSep 6, 2025
  If the error LED flashes on your Husqvarna Chainsaw, it could be due to several reasons. There might be a temperature deviation; in this case, use the battery in temperatures between -10°C (14°F) and 40°C (104°F). Also, there might be too much voltage. Ensure that the mains voltage aligns with the voltage of the product by checking the rating plate. If neither of these issues, remove the battery from the battery charger.
A
Alexander MaxwellSep 9, 2025
Why is the green LED flashing on my Husqvarna Chainsaw?
- J
  James HarrisSep 9, 2025
  If the green LED flashes on your Husqvarna Chainsaw, it indicates low battery voltage. You should charge the battery.
J
Jessica SchmidtSep 12, 2025
What does it mean when the Error LED flashes on my Husqvarna 225i Chainsaw?
- S
  Samantha MurraySep 12, 2025
  If the Error LED flashes on your Husqvarna Chainsaw, it could be due to: * Temperature deviation: Use the battery in temperatures between -10°C (14°F) and 40°C (104°F). * Too much voltage: Ensure that the mains voltage matches the voltage of the product by checking the rating plate. * In other cases, remove the battery from the battery charger.

Husqvarna 225i Specifications

General

Battery Voltage	36 V
Chain Speed at Max Power	20 m/s
Oil Tank Volume	0.2 L
Chain Pitch	3/8 in
Chain Gauge	0.043 in
Bar Length	14 in

Summary

Introduction

Intended Use

Specifies the intended purpose of the product for sawing wood.

Product Description

Details the Husqvarna 225i as an electric motor chainsaw model.

Product Overview

Symbols on the Product

Symbols on the Battery and/or Battery Charger

Manufacturer

Product Liability

Safety

Safety Definitions

Explains the meaning of warnings, cautions, and notes in the manual.

General Power Tool Safety Warnings

Provides crucial safety instructions for operating power tools.

Work Area Safety

Lists precautions for maintaining a safe operating environment.

Electrical Safety

Details essential safety measures related to electrical connections.

Personal Safety

Outlines necessary protective measures for the operator.

Power Tool Use and Care

Provides guidelines for safe operation and maintenance of the tool.

Battery Tool Use and Care

Covers safe usage and handling of the product's battery.

Service

Emphasizes proper servicing and maintenance procedures.

General Chain Saw Safety Warnings

Provides specific safety advice for chainsaw operation.

Causes and Operator Prevention of Kickback

Explains kickback risks and how to avoid them.

Safety Instructions for Operation

General Safety Instructions

Outlines essential safety practices to follow during use.

Safety Instructions for Operation

Details specific safety rules and precautions during the operation phase.

Personal Protective Equipment

Details required safety gear for the operator.

Safety Devices on the Product

Discusses the importance of functional safety features.

Functions of the User Interface

Explains the operation of the product's interface.

The Automatic Stop Function

Describes the product's auto-stop feature.

Chain Brake and Front Hand Guard

Covers the safety mechanism of the chain brake.

Power Trigger Lockout

Explains the function of the trigger lockout safety feature.

Chain Catcher

Describes the component that catches a broken chain.

Right Hand Guard

Details the protective function of the right hand guard.

Battery Safety

Provides warnings and guidelines for battery usage.

Battery Charger Safety

Outlines safety precautions for the battery charger.

Safety Instructions for Maintenance

Provides safety guidelines before performing maintenance.

Safety Instructions for the Cutting Equipment

Details safety measures for the saw chain and guide bar.

Assembly

To Assemble the Guide Bar and Saw Chain (with bar knob)

Steps for attaching the guide bar and chain.

To Assemble the Guide Bar and Saw Chain (with bar bolt)

Steps for attaching the guide bar and chain.

To Install the Battery Charger on the Wall

Instructions for mounting the battery charger.

Operation

To Do a Function Check Before You Use the Product

Pre-operation checks for safety and functionality.

To Use the Correct Chain Oil

Guidance on selecting and using appropriate chain oil.

Battery

Information and warnings regarding the battery.

To Charge the Battery

Instructions for charging the product's battery.

Kickback Information

Detailed explanation of kickback and its prevention.

Common Questions About Kickback

Addresses frequently asked questions regarding kickback.

To Start the Product

Step-by-step guide for starting the chainsaw.

To Use the SavE Function

Instructions for activating the energy-saving mode.

To Stop the Product

Procedures for safely shutting down the chainsaw.

Pull Stroke and Push Stroke

Explains different cutting positions.

To Use the Cutting Technique

General advice on cutting techniques.

To Use the Spiked Bumper

Instructions for using the spiked bumper for cutting.

To Cut a Trunk on the Ground

Guide for cutting logs resting on the ground.

To Cut a Trunk That Has Support on One End

Instructions for cutting supported trunks.

To Cut a Trunk That Has Support on Two Ends

Instructions for cutting trunks supported at both ends.

To Use the Limbing Technique

Guide for removing branches from a felled tree.

To Keep a Safe Distance

Advises on maintaining safe distances during felling.

To Calculate the Felling Direction

Steps to determine the correct direction for felling a tree.

To Fell a Tree

Overview of tree felling methodology.

The Felling Hinge

Explains the critical aspect of the felling hinge.

To Make the Directional Cuts

Steps for making initial cuts to guide felling.

To Use the Safe Corner Method

Describes a technique for controlled tree felling.

To Free a Trapped Tree

Safety advice for dealing with a tree caught by another.

Maintenance

Introduction

Brief intro to maintenance tasks.

Maintenance Schedule

Table outlining maintenance tasks and frequency.

Maintenance and Checks of the Safety Devices on the Product

Procedures for inspecting safety features.

To Do a Check of the Front Hand Guard

Specific check for the front hand guard and inertia brake.

To Do a Check of the Brake Trigger

Procedure to test the chain brake trigger.

To Do a Check of the Power Trigger Lockout

Steps to verify the function of the trigger lockout.

To Do a Check of the Chain Catcher

Inspection of the chain catcher's condition.

To Do a Check of the Functions of the User Interface

Verifying the operation of the control interface.

To Do a Check of the Battery and the Battery Holder

Procedures for checking the battery and its holder.

To Do a Check of the Battery Charger

Inspection of the battery charger and its cord.

To Clean the Cooling System

Instructions for cleaning the product's cooling system.

To Sharpen the Saw Chain

Guide on sharpening the saw chain cutters.

Information about the Guide Bar and Saw Chain

Technical details about bar and chain specifications.

General Information About How to Adjust the Depth Gauge Setting

Explanation of depth gauge adjustment.

To Adjust the Depth Gauge Setting

Steps for adjusting the depth gauge.

To Adjust the Tension of the Saw Chain

Guide for setting the correct chain tension.

To Adjust the Tension of the Saw Chain (with bar knob)

Specific steps for tensioning with a knob.

To Adjust the Tension of the Saw Chain (with bar bolt)

Specific steps for tensioning with a bolt.

Troubleshooting

User Interface

Table of LED screen issues and solutions.

To Do a Check of the Saw Chain Lubrication

Procedure to verify chain lubrication.

To Do a Check of the Chain Drive Sprocket

Inspection of the chain drive sprocket.

To Examine the Cutting Equipment

Checks for wear and damage on cutting parts.

To Do a Check of the Guide Bar

Inspection and maintenance of the guide bar.

Battery

Troubleshooting table for LED display and error codes.

Battery Charger

Troubleshooting table for battery charger conditions.

Transportation, Storage and Disposal

Transportation and Storage

Guidelines for safely storing and transporting the product.

Disposal of the Battery, Battery Charger and Product

Instructions for environmentally responsible disposal.

Technical Data

Accessories

Guide Bar and Saw Chain Combinations

Lists approved cutting attachments.

Filing Equipment and Filing Angles

Information on tools and angles for sharpening.

Approved Batteries

Approved Battery Chargers for the Product

Declaration of Conformity

EU Declaration of Conformity

States product compliance with EU directives.

UK Declaration of Conformity

Original Instructions

Related product manuals

Husqvarna Jonsered CS 2250

56 pages

Husqvarna Jonsered CS 2245

Husqvarna 225i User Manual

Table of Contents

Questions and Answers:

Husqvarna 225i Specifications

Summary

Introduction

Intended Use

Product Description

Product Overview

Symbols on the Product

Symbols on the Battery and/or Battery Charger

Manufacturer

Product Liability

Safety

Safety Definitions

General Power Tool Safety Warnings

Work Area Safety

Electrical Safety

Personal Safety

Power Tool Use and Care

Battery Tool Use and Care

Service

General Chain Saw Safety Warnings

Causes and Operator Prevention of Kickback

Safety Instructions for Operation

General Safety Instructions

Safety Instructions for Operation

Personal Protective Equipment

Safety Devices on the Product

Functions of the User Interface

The Automatic Stop Function

Chain Brake and Front Hand Guard

Power Trigger Lockout

Chain Catcher

Right Hand Guard

Battery Safety

Battery Charger Safety

Safety Instructions for Maintenance

Safety Instructions for the Cutting Equipment

Assembly

To Assemble the Guide Bar and Saw Chain (with bar knob)

To Assemble the Guide Bar and Saw Chain (with bar bolt)

To Install the Battery Charger on the Wall

Operation

To Do a Function Check Before You Use the Product

To Use the Correct Chain Oil

Battery

To Charge the Battery

Kickback Information

Common Questions About Kickback

To Start the Product

To Use the SavE Function

To Stop the Product

Pull Stroke and Push Stroke

To Use the Cutting Technique

To Use the Spiked Bumper

To Cut a Trunk on the Ground

To Cut a Trunk That Has Support on One End

To Cut a Trunk That Has Support on Two Ends

To Use the Limbing Technique

To Keep a Safe Distance

To Calculate the Felling Direction

To Fell a Tree

The Felling Hinge

To Make the Directional Cuts

To Use the Safe Corner Method

To Free a Trapped Tree

Maintenance

Introduction

Maintenance Schedule

Maintenance and Checks of the Safety Devices on the Product

To Do a Check of the Front Hand Guard

To Do a Check of the Brake Trigger

To Do a Check of the Power Trigger Lockout

To Do a Check of the Chain Catcher

To Do a Check of the Functions of the User Interface

To Do a Check of the Battery and the Battery Holder

To Do a Check of the Battery Charger

To Clean the Cooling System

To Sharpen the Saw Chain