To Next PageTo Next Page
Need help?Do you have a question about the Husqvarna 236 and is the answer not in the manual?
General| Chain Pitch | 3/8" |
|---|---|
| Sound Power Level | 113 dB(A) |
| Bar Length | 14-16 inches |
| Weight | 4.7 kg |
| Fuel Tank Volume | 0.3 liters |
| Oil Tank Volume | 0.2 liters |
| Vibration Level (Left/Right Handle) | 3.5/ m/s² |
Emphasizes reading and understanding the manual before use.
Details various warning and identification symbols found on the machine.
Lists essential PPE such as helmet, hearing, and eye protection.
Warns about kickback hazards and potential serious injuries.
Covers essential checks, fatigue, alcohol, drugs, and machine modifications.
Explains integrated safety equipment like chain brake, hand guards, throttle lockout.
Focuses on understanding kickback, using the chain brake, and proper grip.
Discusses chain sharpening, depth gauge, and bar maintenance for safety.
Covers chain oiling, lubrication checks, and proper chain tensioning procedures.
Step-by-step instructions for attaching the bar and chain to the saw.
Information on how to fit a spike bumper, directing to service agent.
Details petrol, two-stroke oil, and correct mixing ratios for the engine.
Discusses the importance of using correct chain oil and its properties.
Provides warnings and steps for safely refuelling the machine.
Guidelines for safely transporting and storing the chain saw.
Step-by-step guide for starting a cold engine with choke and air purge.
Instructions for starting the engine when it is already warm.
Lists checks to perform before starting work, including chain brake, handles, and muffler.
Covers looking around, avoiding bad weather, removing small branches, and standing safely.
Explains what kickback is and how to prevent it through technique.
Guides on how to safely cut wood under tension, avoiding injury.
Discusses safe practices and considerations for felling trees.
Details basic settings, running-in, and fine-tuning idle speed.
Instructions for checking and maintaining chain brake, hand guards, and throttle lockout.
Details on maintaining the muffler, including spark arrestor, and cleaning/replacing the air filter.
Lists checks and cleaning to be performed daily or after 5-10 hours of use.
Outlines maintenance tasks required weekly or monthly.
Details engine displacement, power, ignition, fuel/oil capacities, and weight.
Lists vibration levels and technical details for chain and bar combinations.
Lists recommended bar lengths, pitch, gauge, and chain types for the models.
States compliance with EU directives for machinery, EMC, and noise emissions.
