Need help?Do you have a question about the Husqvarna 272XP and is the answer not in the manual?
General| power_output | 3.6 kW |
|---|---|
| oil_tank_volume | 0.4 liters |
| chain_pitch | 3/8 inch |
| bar_length_range | 15-24 inches |
| spark_plug | NGK BPMR7A, Champion RCJ7Y |
Covers general info, target audience, layout, how to use the manual, and repair methods.
Details required tools and crucial safety advice for manual use.
Outlines general safety precautions and warnings for workshop operations.
Details specific safety warnings and guidelines for operating and servicing the chain saw.
Lists all tools required for servicing various Husqvarna chain saw models.
Details specialized tools required for specific Husqvarna chain saw models.
Comprehensive list of tools with their order numbers and designations.
Provides a structured overview of common chain saw faults and potential causes.
Outlines procedures for diagnosing and resolving chain saw issues.
Details the dismantling, inspection, and assembly of the chain brake system.
Explains the function, types, and replacement procedure for the chain catcher.
Covers dismantling, cleaning, inspection, and assembly of the muffler.
Describes how to dismantle, inspect, and assemble the stop switch.
Details the dismantling, cleaning, inspection, and assembly of the throttle lock.
Step-by-step instructions for disassembling and cleaning the starter unit.
Specific procedure for replacing the starter ferrule.
Steps for reassembling the starter unit after maintenance.
Covers checking, dismantling, and assembling the ignition system.
Details the function, troubleshooting, and testing of the electric handle heating system.
Step-by-step guide for removing and disassembling the centrifugal clutch.
Procedures for cleaning and inspecting clutch components.
Instructions for reassembling the centrifugal clutch.
Procedures for dismantling the oil pump for various saw models.
Steps for cleaning and inspecting oil pump components.
Instructions for reassembling the oil pump.
Explains the basic components and principles of the carburettor.
Details how the carburettor functions in different operating modes.
Steps for removing the carburettor and its plugs for maintenance.
Procedures for cleaning and inspecting carburettor components.
Steps for reassembling the carburettor after cleaning or repair.
Method for testing the carburettor's integrity and function.
Describes the components of the air filter system.
Instructions for cleaning, inspecting, and oiling the prefilter.
Guidance on cleaning or replacing the main paper air filter.
Steps for removing, cleaning, and inspecting the fuel tank unit.
Instructions for refitting the fuel tank unit.
Explains the purpose and components of the anti-vibration system.
Steps for removing and reassembling the anti-vibration system components.
Detailed steps for removing the piston and cylinder assembly.
Procedures for cleaning and inspecting piston and cylinder parts.
Identifies common faults related to pistons and cylinders and their causes.
Instructions for reassembling the piston and cylinder.
Test procedure for the decompression valve using a pressure gauge.
Steps for disassembling the crankcase and crankshaft.
Procedures for cleaning and inspecting crankcase and crankshaft components.
Instructions for reassembling the crankcase and crankshaft.
Guide for replacing bar bolts on most saw models.
Method for changing seals without splitting the crankcase.
To Next Page
