Need help?Do you have a question about the Husqvarna 61, 268, 272XP and is the answer not in the manual?
Explains symbols found on the chain saw itself.
Explains symbols used within the manual.
Welcomes the user and provides background on Husqvarna.
Identifies and labels all parts of the chain saw with numbers.
Essential checks and preparations before operating the saw.
Key safety tips and general advice for safe operation.
Details required safety gear for operator protection.
Explains the saw's built-in safety mechanisms like chain brake.
Covers throttle lockout, chain catcher, right hand guard.
Explains vibration damping system and muffler functions.
Guidelines for choosing and maintaining cutting tools.
General rules, chain, kickback reduction, and bar details.
Details on chain sharpening and adjusting depth gauges.
Step-by-step guide on how to properly tension the saw chain.
Instructions on chain lubrication and oiling the bar tip sprocket.
Checks for wear on the drive sprocket and guide bar.
Step-by-step instructions for attaching the bar and chain.
Instructions for attaching a spike bumper.
Details on petrol, two-stroke oil, and mixing ratios.
Safe practices for refuelling and handling fuel.
Step-by-step guide for starting a cold engine.
Procedures for starting a warm engine and shutting off the saw.
Essential checks and basic safety rules before operation.
Guidance on maintaining balance and proper hand grip.
Explains cutting methods and how to prevent kickback.
Techniques for removing branches and cutting logs safely.
Procedures and safety precautions for felling trees.
Details on making directional and felling cuts for tree control.
Methods for safely handling trapped trees and tensioned cuts.
Detailed explanation of kickback causes and prevention.
Guide to adjusting the carburettor for optimal performance.
Instructions for inspecting chain brake and hand guard.
Verifying the function of the brake trigger and throttle lockout.
Maintenance for the stop switch and muffler.
Procedures for maintaining the starter mechanism.
How to clean and replace the air filter for optimal engine running.
Spark plug maintenance and bar tip sprocket lubrication.
How to adjust the oil pump for chain lubrication.
Maintaining the cooling system and precautions for winter operation.
A detailed schedule of daily, weekly, and monthly maintenance tasks.
Details on engine displacement, bore, stroke, and power.
Recommended bar and chain types for the saw.
Information on chain sharpening tools and techniques.
Compliance statement for European directives.
To Next Page
General
